Thursday Exercise 2.3: Using Stash for unique large input

In this exercise, we will run a multimedia program that converts and manipulates video files. In particular, we want to convert large .mov files to smaller (10-100s of MB) mp4 files. Just like the Blast database in the previous exercise, these video files are too large to send to jobs using HTCondor's default file transfer mechanism, so we'll be using the Stash tool to send our data to jobs. This exercise should take 25-30 minutes.

Data

We have placed movie files in your Stash, so that they'll be available to our jobs when they run out on OSG.

  1. Log into training.osgconnect.net
  2. Navigate to your local scratch directory:

    user@training $ cd /local-scratch2/<USERNAME>
    

    Replacing <USERNAME> with your username

  3. Create a directory for this exercise named thur-stash-unique and change into it

  4. How big are the three video files? Which is the smallest? (Find out with ls -lh ~/stash/public/*.mov.)
  5. We're going to need a list of these files later. For now, let's save that list to a file in this directory by running ls and redirecting the output to a file:

    user@training $ ls ~/stash/public/*.mov > movie_list.txt
    

    Then open movie_list.txt and remove the leading directory structure (/home/<username>/stash/public/), leaving only the base filenames (e.g. test_open_terminal.mov). Or, run the following command which will do this for you:

    user@training $ sed -i 's,.*/,,' movie_list.txt
    

Software

We'll be using a multi-purpose media tool called ffmpeg to convert video formats. The basic command to convert a file looks like this:

user@training $ ./ffmpeg -i input.mov output.mp4

In order to resize our files, we're going to manually set the video bitrate and resize the frames, so that the resulting file is smaller.

user@training $ ./ffmpeg -i input.mp4 -b:v 400k -s 640x360 output.mp4

To get the ffmpeg program do the following:

  1. We'll be downloading the ffmpeg pre-built static binary originally from this page: http://johnvansickle.com/ffmpeg/.

    user@training $ wget http://proxy.chtc.wisc.edu/osgschool19/ffmpeg-release-64bit-static.tar.xz
    
  2. Once the binary is downloaded, un-tar it, and then copy the main ffmpeg program into your current directory:

    user@training $ tar -xf ffmpeg-release-64bit-static.tar.xz
    user@training $ cp ffmpeg-4.0.1-64bit-static/ffmpeg ./
    

Script

We want to write a script that uses ffmpeg to convert a .mov file to a smaller format. Our script will need to:

  1. Copy that movie file from Stash to the job's current working directory (as in the previous exercise
  2. Run the appropriate ffmpeg command
  3. Remove the original movie file so that it doesn't get transferred back to the submit server. This last step is particularly important, as otherwise you will have large files transferring into the submit server and filling up your local scratch directory space.

Create a file called run_ffmpeg.sh, that does the steps described above. Use the name of the smallest .mov file in the ffmpeg command. Once you've written your script, check it against the example below:

#!/bin/bash

module load stashcache
stashcp /user/<USERNAME>/public/test_open_terminal.mov ./
./ffmpeg -i test_open_terminal.mov -b:v 400k -s 640x360 test_open_terminal.mp4
rm test_open_terminal.mov

In your script, replace <USERNAME> with your training.osgconnect.net username.

Ultimately we'll want to submit several jobs (one for each .mov file), but to start with, we'll run one job to make sure that everything works.

Submit File

Create a submit file for this job, based on other submit files from the school (This file, for example.) Things to consider:

  1. We'll be copying the video file into the job's working directory, so make sure to request enough disk space for the input mov file and the output mp4 file. If you're aren't sure how much to request, ask a helper in the room.

  2. Important Don't list the name of the .mov in transfer_input_files. Our job will be interacting with the input .mov files solely from within the script we wrote above.

  3. Note that we do need to transfer the ffmpeg program that we downloaded above.

    transfer_input_files = ffmpeg
    
  4. Add the same requirements as the previous exercise:

    +WantsStashCache = true
    requirements = (OpSys == "LINUX") && (HAS_MODULES =?= true)
    

Initial Job

With everything in place, submit the job. Once it finishes, we should check to make sure everything ran as expected:

  1. Check the directory where you submitted the job. Did the output .mp4 file return?
  2. Also in the directory where you submitted the job - did the original .mov file return here accidentally?
  3. Check file sizes. How big is the returned .mp4 file? How does that compare to the original .mov input?

If your job successfully returned the converted .mp4 file and did not transfer the .mov file to the submit server, and the .mp4 file was appropriately scaled down, then we can go ahead and convert all of the files we uploaded to Stash.

Multiple jobs

We wrote the name of the .mov file into our run_ffmpeg.sh executable script. To submit a set of jobs for all of our .mov files, what will we need to change in:

  1. The script?
  2. The submit file?

Once you've thought about it, check your reasoning against the instructions below.

Add an argument to your script

Look at your run_ffmpeg.sh script. What values will change for every job?

The input file will change with every job - and don't forget that the output file will too! Let's make them both into arguments.

To add arguments to a bash script, we use the notation $1 for the first argument (our input file) and $2 for the second argument (our output file name). The final script should look like this:

#!/bin/bash

module load stashcache
stashcp /user/<USERNAME>/public/$1 ./
./ffmpeg -i $1 -b:v 400k -s 640x360 $2
rm $1

Replacing <USERNAME> with your own username. Note that we use the input file name multiple times in our script, so we'll have to use $1 multiple times as well.

Modify your submit file

  1. We now need to tell each job what arguments to use. We will do this by adding an arguments line to our submit file. Because we'll only have the input file name, the "output" file name will be the input file name with the mp4 extension. That should look like this:

    arguments = $(mov) $(mov).mp4
    
  2. To set these arguments, we will use the queue .. matching syntax that we learned on Monday. In our submit file, we can then change our queue statement to:

    queue mov from movie_list.txt
    

Once you've made these changes, try submitting all the jobs!

Bonus

If you wanted to set a different output file name, bitrate and/or size for each original movie, how could you modify:

  1. movie_list.txt
  2. Your submit file
  3. run_ffmpeg.sh

to do so?

Show hint Here's the changes you can make to the various files:

  1. movie_list.txt

    ducks.mov ducks.mp4 500k 1280x720
    teaching.mov teaching.mp4 400k 320x180
    test_open_terminal.mov terminal.mp4 600k 640x360
    
  2. Submit file

    arguments = $(mov) $(mp4) $(bitrate) $(size)
    
    queue mov,mp4,bitrate,size from movie_list.txt
    
  3. run_ffmpeg.sh

    1
    2
    3
    4
    5
    6
    #!/bin/bash
    
    module load stashcache
    stashcp /user/<USERNAME>/public/$1 ./
    ./ffmpeg -i $1 -b:v $3 -s $4 $2
    rm $1
    

    Replacing <USERNAME> with your own username